Taifun GT IV (GT4) 2023 RTA

To mark its fifth anniversary since being introduced to the market, Introducing Taifun GT IV 2023!

The TaifunGT1V is still the reference atomizer for many users for single coils in terms of taste, handling, and performance. Its success and distribution speak for themselves. For its 5th anniversary, the well-known Taifun knurling has been replaced by the edges first introduced in the Taifun GT V  and this fifth anniversary 2023 edition of the Taifun GT IV is now available with the wire traps first introduced with the Taifun GT 1V Titan Edition.

The Taifun GT4 is the fourth iteration in the Taifun GT series, bringing a number of enhancements unlike any Taifun GT RTA before! Now with a large build deck and significantly larger air flow, allowing for the installation of large complex wire builds, and capable of higher wattage vaping.

Juice flow control is integrated into the base itself. Turning the liquid flow control ring against the base will adjust the juice flow aperture, and eliminates the need for proprietary keyed drip tips.

Note: Screwing the tank section too tight down on to the tank base will result in locking the liquid flow control ring in place. Be sure to only screw on the tank section while the liquid flow control ring is fully closed, and do not over tighten the tank on to the base. Leaving a bit of room will allow you to maintain the ability to rotate the liquid flow control ring.

Air flow is easily adjusted by turning the air flow control ring at the base of the deck.

The revised build deck in the Taifun GT IV 2023 RTA has now reduced the wire trap locations to FOUR, eliminating the middle location as found on the original deck. As well, an indent is machined into the bottom of each post location to allow wire legs to be trapped for easier building.

Six air outlet ports direct air flow to strike the coil from underneath the coil at an angle from both sides of the coil, fully enveloping the coil in air, resulting in very flavourful vapour production.

Top cap easily removes for top filling. Be sure to fully close the juice flow control before filling, to prevent flooding the deck.

Taifun GT IV 2023 Specifications:

• Diameter: 25mm at the base, 25.55mm at the widest point (Corners of flat edges).
• Height: 52mm (without drip tip and connection screw)
• Liquid capacity: 5 mL
• Food-safe materials (1.4301 stainless steel and PEEK)
• New air duct system via the poles in the chamber with adjustable AFC from the outside. Individual flow to the coil via one of the two, or both poles is possible.
• For restricted direct lung to direct lung, 
• Multiple wire mounts (4 points of connection) to enable easy and versatile installation of coils. Optimized for single coil builds, but dual coil builds are possible
• Intuitive liquid control system, adjusted externally
• Top fill
• Interchangeable tank options.

Note: The Taifun GT IV is not designed for use on pure hybrid mech mods. The 510 center pin is NOT adjustable, and should not be released for this purpose.

Taifun GT IV 2023 Package Contents

• Taifun GT IV 2023 atomizer
• Spare parts bag
• 1.3mm hex key
• Instruction manual