Measurements:
- Diameter: 22mm
- Height: 34.5mm (without 510 connector and drip tip)
- Weight: 35g
- Capacity: about 4 ml
- Airflow controll: 1.2mm – 1,5mm – 2,0mm - 2,5mm for dual or single coil,and 2x1,2mm stacked for single coil use only
The Origen Genesis v2 has a huge capacity for its size, it holds up to 4ml of juice.It has two pair of "dedicated" wick holes:
- One pair for cotton/silika with 4,5mm on the one side
- One pair for mesh with 3mm on the opposite side
The top cap is held in place by two O-rings which are inside the top cap.
The AFC ring is held in place by screwing the upper part of the top cap which has the high efficiency cooling fins.
The high efficiency cooling fins aren’t only design elements, it is necessary to dissipate the heat much faster.
The polycarbonate tank (stainless steel tank will be sold separately) is fine-threaded, sealed by two o-rings, and it is secured by a threaded stainless steel ring.
Take care when disassembling and reassembling the tank section, and do it only when it is absolutely necessary! Do not overtighten!
Engraving and serial number on the bottom of the atty, around the 510 connection.
No Drip tip.