Nub material White Teflon, PEEK, Black PEEK, to dissipate heat.
Core material SS304 because it has better conductivity compared to SS316.
Orings are all silicone, not BUNA.
Height from the ase after threading to top of tip is 11mm
Bore is 4.5mm.
Cone is chamfered and tapers off starting at a 40° angle.
Has an anti-spitback chamber when in BORO mode. When it is in AIO mode the dome helps to channel and constrict flavor into the main bore.
Usage in Boro mode, lock the locknut into the device first with coin slots, before screwing in the AIO threading for maximum leverage, then only install nub in a twisty motion.
Usage in AIO mode simply unscrew the stock AIO nut on the device and replace with the tip.
The top portion of the tip is finely knurled for grip. The bottom of the nut also has coin slots in case both pieces are hard to separate.
It Will fit exact same concentric imperial NPT 1/2" 20 threads such as the BB, Orca, Delro, Ion, Key amongst others. Will not fit mods with Reset-based adapters at this point i.e. Harpy, C-bot, Boxxer.