Taifun® GTR XS - The classic self-winding evaporator for demanding users - The definition of high end MADE IN GERMANY
Retro meets progress in the next generation. With the Taifun® GTR XS, we are once again relying on proven concepts and expanding them once again to meet the needs of users. Despite its still low height, the Taifun® GTR XS has a capacity of 3 ml, a Top Fill System, Liquid Control and Variable Air Flow Control. The height of the Taifun® GTR XS corresponds to the 2 ml kit. All components are compatible with each other!
The Taifun® GTR XS is the first vaporizer to be selected in a distinctive surface.
Behind the inconspicuous look of the Taifun® GTR are some unusual solutions for well-known functions.
The TopCap completely dispenses with a thread. The quick-release fastener is extremely robust and user-friendly. With just a minimal turn, the tank can be opened and closed without missing the slightest high-quality impression.
INNOVATIVE AIRFLOW CONTROL
The Typhoon® GTR has two separate air ducts. In the basic version, the cross-sections of the channels are 1.0mm and 1.2mm. The snap-in ball-supported AFC can be used to open either both channels completely or half-openly, as well as fully or half-openly.
The AFC ring of the Taifun® GTR has a stop in both directions. However, due to the intelligent arrangement of the air holes, there is no adjustment from small to large. The adjustment distance is kept as short as possible and the outer opening is always exposed, halved or closed with a click to the right or left (depending on the selected air hole). To save height, the fluted AFC ring is also used for mounting / disassembling the evaporator.
The possibilities of the AFC allow a wider range in the restrictive steam range without much effort. Both lovers of the classic, very strict, MTL and supporters of the very restrictive DL vaping can adjust the air supply to their personal needs without having to accept compression losses under the winding. Alternative positive poles are also available for optional adjustment.
NEXT-GENERATION VARIABLE LIQUIDCONTROL
The Typhoon® GTR is designed for versatile use in restrictive areas. This reflects the new arrangement of the Liquidcontrol.
One user vapes thinner liquids with less power and higher negative pressure and the other vapes more viscous liquids with more power and more air.
In order to meet these requirements, a liquid control system is required that can adapt to the individual requirements of the users to a certain extent. Simply turning it up further is not enough for a satisfying vaping experience in the MTL and restrictive DL range.The
left liquid channel is optimized for 50/50 liquids with restrained performance and greater negative pressure in the chamber. Due to the narrower and higher rising channel, the chamber is not flooded even under the aforementioned conditions.
The right channel is suitable for 70/30+ liquids with increased performance due to its wider milling and lower climbing height. If the train duration is longer, both channels can also be opened here. The Liquid Control is adjusted by a slight and simple twist of the tank. 4 recesses for the access points on both sides allow a very short rotation in circumference, no matter where the attachment of the threads begins.
KEEP IT SIMPLE
The winding deck of the Taifun® GTR is the logical continuation of the "Taifun deck" introduced with the GT IV. The wire mounts are the same as those of the Typhoon® BTD, with the improved lugs for easier wire pickup.
The 2-sided ventilation introduced with the Typhoon® GT IV has also been adapted to the requirements of a thoroughbred restrictive evaporator. Both air ducts exit at a slight angle under the winding and allow the coil to be variably adjusted to the respective needs of the user in terms of taste and "flash". In principle, "keep it simple" also applies to the Typhoon® GTR. The deck does not require any great wrapping skills or cotton wool laying techniques for an optimal vaping experience. Simply install the coil, pull the cotton wool through it and put it in the bag. Ready.
Brief overview of the device characteristics of the Typhoon® GTR XS
- Diameter 23 mm
- Height 35 mm (without DripTip with 510 connector)
- 510 DripTip
- Stainless steel 1.4301, PEEK, PCTG
- Adjustable AFC over 2 holes with 1.0 mm and 1.2 mm
Scope of delivery
1 x Taifun® GTR XS
1 x 510 DripTip "GTR" 4 mm inner diameter
1 x spare parts bag
1 x user manual